Edelbrock 2101 Performer Intake Manifold for 1955-86 Small-Block Chevy

  
Edelbrock 2101 Performer Intake Manifold for 1955-86 Small-Block Chevy. Tomorrow the price will be higher! Gasket Or Seal Included: No.

Availability Note: Available to Order. Center Maximum Height: 4.050 in.

Front Maximum Height: 3.500 in. Rear Maximum Height: 4.600 in. Single Or Dual Plane Type: Dual Plane. Unfortunately UPS doesn't accept PO box address.

Once we see that items are on their way we will send a replacement. Edelbrock Part # 2101 Performer intake manifold is designed for street 1955-86 small-block Chevys. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm.

The Performer intake manifolds are ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs. Not for 1987 and later cast iron or Chevy Bowtie heads. Will fit 1987 and later stock aluminum heads. Manifold height: A-3.50", B-4.60" Carb pad height: 4.05 Carb recommendations: OEM 4-Bbl, Use choke rod # 9171.

Edelbrock AVS2 Series or Performer Series Carb 500-650cfm. Port exit dimensions: 1.14" x 1.88" Recommended intake gasket: Edelbrock # 7201. Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant # 1076, DO NOT USE END SEALS GASKETS. Sealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage.

NPT/Pipe thread fittings require the use of Teflon tape or paste on threads to ensure proper seal. DO NOT OVERTIGHTEN NPT/Pipe fittings, this may cause the aluminum to crack around the fitting boss.

NPT/Pipe thread is a tapered thread. Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum. Choke plate # 8901 included Even though manifolds are compatible with EGR systems, this does not mean they are legal for use on emissions controlled vehicles.

Check local laws for legality. Proper installation is the responsibility of the installer. Please see the "Compatibility" link at the top of the listing.