Block Chevy Engine

Universal Small Block Chevy Radiator Kit withFan Shroud, 28 Inch


Universal Small Block Chevy Radiator Kit withFan Shroud, 28 Inch
Universal Small Block Chevy Radiator Kit withFan Shroud, 28 Inch
Universal Small Block Chevy Radiator Kit withFan Shroud, 28 Inch
Universal Small Block Chevy Radiator Kit withFan Shroud, 28 Inch
Universal Small Block Chevy Radiator Kit withFan Shroud, 28 Inch
Universal Small Block Chevy Radiator Kit withFan Shroud, 28 Inch
Universal Small Block Chevy Radiator Kit withFan Shroud, 28 Inch
Universal Small Block Chevy Radiator Kit withFan Shroud, 28 Inch
Universal Small Block Chevy Radiator Kit withFan Shroud, 28 Inch
Universal Small Block Chevy Radiator Kit withFan Shroud, 28 Inch
Universal Small Block Chevy Radiator Kit withFan Shroud, 28 Inch
Universal Small Block Chevy Radiator Kit withFan Shroud, 28 Inch

Universal Small Block Chevy Radiator Kit withFan Shroud, 28 Inch   Universal Small Block Chevy Radiator Kit withFan Shroud, 28 Inch
A professional quality, lightweight, all-aluminum racing radiator available at any budget, Furnace-brazed construction is more durable and improves performance vs. Epoxy and gasket construction, Traditional Chevy 1.5" driver side upper inlet, and 1.75" passenger side lower outlet, Aluminum fan shroud included features an adjustable collar that will accommodate 15"-20" engine-driven fan diameters, High pressure safety locking 28-32lb racing radiator cap included. Universal Small Block Chevy Radiator Kit w/Fan Shroud, 28 Inch.

Our line of universal crossflow aluminum Chevy radiators make it easy for budget-minded racers to get a professional-quality, no compromises aluminum racing radiator. Constructed of lightweight, 100% aluminum, we furnace braze the radiator assembly for maximum durability and performance, no epoxy and gaskets here!

Epoxy acts as an insulator, causing radiators to heat unevenly, and this stress combined with the vibration from racing can break epoxy seals and leak or separate over time. Furnace brazing minimizes fatigue from the rapid heating and cooling cycles. Since all the metal parts are fused together with a metal joint, they conduct heat evenly between the tanks and the rest of the assembly, preventing uneven expansion between the fused pieces, keeping the joint strong. We welded a billet filler neck for a strong seal under high pressures that will outperform cast filler necks with an industry standard 1-5/8" inner cap diameter and a 1/8" NPT overflow port. Our single pass design uses two rows of 1 wide aluminum tubes which have more surface area than copper radiators, cooling the same as five rows of copper tubes.

A dense fin structure adds an additional layer of strength to the support tubes, better directs air flow and has more area to transfer heat. The core is 2.25, a perfect balance of maximizing directed airflow and heat transfer. The cross-flow design allows the radiator cap to be mounted on the low-pressure (suction) side of the system, minimizing pressure on the neck assembly, especially in high-RPM usage. This radiator is built for one purpose, cooling your engine.

No transmission cooler maximizes cooling efficiency. A professional quality, lightweight, all-aluminum racing radiator at any budget. Furnace-brazed construction is more durable and improves performance vs.

Two-rows of 1 aluminum tubes cool better than 5 rows of traditional copper tubes. Dense fin structure improves airflow and adds rigidity. Billet aluminum filler neck guarantees a long-lasting seal under high pressures. Width (outside tank-to-outside tank) of 31-inch, 19 inches tall to fit a variety of applications. Single-pass, cross-flow design with 2.25 core. Basic design for universal fit and focus on engine cooling.

Traditional Chevy 1.5" driver side upper inlet, and 1.75" passenger side lower outlet. Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. (1) Speedway Chevy SBC/BBC Universal Aluminum Radiator. (1) Aluminum Fan Shroud Kit for Radiator, Engine Driven Fan. (1) Speedway Safety Locking Radiator Cap, 28-32 Lbs.

Aluminum Fan Shroud Kit for Radiator, Engine Driven Fan. Made for exact fit of many Muscle Car and Hotrod radiators. Allows the installer the choice of off center, side-to-side and above the radiator fan positioning. For crossflow or downflow radiator mounting. Adjustable collar; adjusts for 15-20 fan diameters. Includes all the necessary hardware and mounting instructions. Outside measures 19.5" tall x 16-3/4" wide x 2.5 deep. Inside measures 17-3/4" tall x 13" wide. Speedway Safety Locking Radiator Cap, 28-32 Lbs. This safety lock cap for radiators is designed for high pressure, 28-32 lbs. Provision to release pressure, taking the danger away from checking your race high pressure system. High pressure cap raises boiling point of water. Learn more about cooling systems, how to choose the proper pressure cap, and how they work by reading our tech article. 19.00" to 19.99".

Please take advantage of the "add to cart" button on each listing to get everything in your cart prior to completing checkout. Speedway Motors is America's Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 71 years. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. Speedway accepts full responsibility for the accuracy of our listings and product representation.

This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Engine Cooling Components\Radiators". The seller is "speedway_motors" and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Republic of Croatia, Malaysia, Brazil, Chile, Colombia, Costa Rica, Panama, Trinidad and Tobago, Guatemala, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam.

  1. Brand: Speedway Motors
  2. Type: Radiators
  3. Material: Aluminum
  4. Manufacturer Part Number: 9100954-28
  5. Size: 28 Inch

Universal Small Block Chevy Radiator Kit withFan Shroud, 28 Inch   Universal Small Block Chevy Radiator Kit withFan Shroud, 28 Inch