Block Chevy Engine

Edelbrock 7562 RPM Air-Gap Big Block Chevy 2-R Intake Manifold Square Port Heads


Edelbrock 7562 RPM Air-Gap Big Block Chevy 2-R Intake Manifold Square Port Heads
Edelbrock 7562 RPM Air-Gap Big Block Chevy 2-R Intake Manifold Square Port Heads
Edelbrock 7562 RPM Air-Gap Big Block Chevy 2-R Intake Manifold Square Port Heads
Edelbrock 7562 RPM Air-Gap Big Block Chevy 2-R Intake Manifold Square Port Heads

Edelbrock 7562 RPM Air-Gap Big Block Chevy 2-R Intake Manifold Square Port Heads    Edelbrock 7562 RPM Air-Gap Big Block Chevy 2-R Intake Manifold Square Port Heads

Fits Chevy 396 to 454 Big-Block V8's. Engine Block Deck Height: Standard deck. Basic Operating RPM Range: 1,500-6,500.

Intake Manifold Height: 5.220 in. Notes: Requires a gasket with a 2.54 in.

Port size or runner will not seal due to extra bolt locations. Do not use large port gaskets. Will not fit under the stock hood of a Corvette, 1965-67 Chevelle or 1967-81 Camaro. Edelbrock Performer RPM Air-Gap Intake Manifolds.

Edelbrock Performer RPM Air-Gap intake manifolds incorporate race-winning technology that's been used on Victor Series competition intakes for years. The open air space from the Air-Gap design separates the runners from the heat of the lifter-valley cover. So, the air/fuel mixture stays cooler all the way to the heads, which produces a denser charge for more power. Runners are tuned to move the power band 1,000 rpm higher than Performer Air-Gap manifolds, from idle to 5,500 rpm up to 1,500 to 6,500 rpm.


Edelbrock 7562 RPM Air-Gap Big Block Chevy 2-R Intake Manifold Square Port Heads    Edelbrock 7562 RPM Air-Gap Big Block Chevy 2-R Intake Manifold Square Port Heads